A brief introduction about Panasonic SMT pick and place machine – NPM
NPM Panasonic placement machine , NPM high productivity with dual-track mounting method
Industry-leading productivity per unit area: when 3 NPM units are connected, the placement speed is as high as 171,000 cph, and the productivity per unit area is 27,800 cph/㎡
Double-track conveyor belt: When components are mounted on one rail, the substrate can be replaced on the other side to increase productivity and realize the production of dissimilar substrates
High function & high reliability
Inherit Panasonic’s DNA: Fully compatible with CM Series hardware
It has the ability to correspond to 0402-100*90mm components, with functions such as component thickness inspection and substrate bending inspection, which can greatly improve the quality of placement and fully meet the needs of customers for difficult processes such as POP and flexible substrates.
Simple operation
The user-friendly interface design and the model switching instructions can greatly shorten the exchange time of the rack trolley
Mounting head type
High speed, general purpose
Number of nozzles
12 nozzles, 8 nozzles, 2 nozzles
Mounting speed
0.063 s/chip
0.106 s/chip
0.423 s/QFP
Placement accuracy
±40μm/chip
±40μm/chip
±30μm/QFP
Number of racks
Maximum 68 companies (8mm double, small reel)
Corresponding component size
0402~L12mmW12mmT6.5mm
0402~L32mmW32mmT12mm
0603~L100mmW90mmT28mm
Substrate size Monorail conveyor belt
L50mmW50mm~L510mmW480mm
Double track conveyor belt
Double track type: L50mmW50mm~L350mmW216mm
Monorail type: L50mmW50mm~L350mmW460mm
High productivity—using dual-track printing
Productivity per unit area is 47% UP (compared to the previous model SP18P-L)
Switching function of the next model in operation: Because the printing base is arranged at the front and back, it can be operated completely independently, and the model can be switched on the other side when the production is continued on one side
High-quality printing
Inherit Panasonic’s unique printing DNA: DC printing process + high-speed multiple stripping + gentle cleaning + advanced squeegee holder-to ensure high-quality printing
Post-Print Inspection (SPI)—APC System
Feedback to the printing machine: It can realize printing position correction, cleaning command, and stop command in case of sudden defects
Feed forward to the placement head: provide solder paste position information and block, bad mark information communication
Feed forward to AOI: APC component placement position information
Inspection after installation (AOI)
Inspection of installed components
Foreign body inspection before mounting: foreign body inspection before BGA mounting & inspection of sealed enclosure before mounting