Daily maintenance knowledge of dispensing machine
The quality of daily maintenance of the dispensing machine directly affects the service life of the dispensing machine. The daily work of dispensing machine maintenance has a great impact on the service life of the dispensing machine, including the smoothness of its daily use. So let us learn how to maintain the dispensing machine in daily use.
- When replacing the rubber type, the pipeline needs to be cleaned. At this time, first close the feed valve, open the discharge valve, and discharge the remaining glue from the glue barrel. Then close the discharge valve, open the feed valve, and pour the cleaning solvent into the glue storage barrel. Activate the machine and press the solvent according to the usual operating method. out of the rinse.
- If the air pressure inlet is abnormal and water vapor is found, please remove the water vapor in the pressure regulating filter or check the air pressure source for any abnormalities. Before using the glue dispensing machine in a large amount, please try a small amount first to master the use skills of the product to avoid mistakes. When the test shows no problems, then use the double-liquid glue dispensing machine or the double-liquid glue filling machine for large-volume production; The vacuum system performs vacuum and defoaming treatment on the glue to eliminate bubbles generated during the mixing process, or let it stand for 10-20 minutes before use so that the bubbles generated during mixing are eliminated in time; the more glue is mixed together, the more glue is mixed together.
- Please wipe the machine part regularly to increase its service life. The more glue that is mixed together, the faster the reaction and the faster the curing speed. Therefore, the glue should be properly prepared according to the actual production situation, otherwise it will cause a waste of glue. Eliminate surprises and improve production efficiency. Today, liquid control technology and dispensing equipment are widely used in various production areas in modern industry.
- When the machine is out of service for a long time, the power supply should be unplugged. This will not only extend the life of the machine but also save a lot of electricity bills. With the needs of ever-changing industrial development, liquid control technology and dispensing equipment are constantly developing into ultra-high precision control, diversification and specialization.
Note: Clean it after each use. Wipe all visible areas with alcohol. It is best to apply engine oil or butter to frequently moved parts to keep them lubricated. If not used for a long time, be sure to apply glue. Light, otherwise it will solidify in your dispensing machine and cost a lot of money.
Send us an inquiry , we will get back to you soon ,thank you!