1、 Basic concepts of conveyor belt conveying parameters
Conveyor parameters refer to various parameters that need to be set during the operation of the conveyor belt, including speed, tilt angle, material humidity, and other factors. These parameters directly affect the operating efficiency of the conveyor belt and the quality of the conveyed materials.

1. Speed

The speed of a conveyor belt is generally expressed in meters per second, and is usually determined based on the characteristics of the conveyed material and the length of the conveyor belt. Excessive or insufficient speed can affect the operation of the conveyor belt, so adjustments need to be made according to the actual situation.

2. Tilt angle

The inclination angle refers to the degree of inclination of the conveyor belt, generally expressed in degrees. The size of the inclination angle has a significant impact on the operation effect of the conveyor belt and the quality of the conveyed materials, and needs to be adjusted according to the actual situation.

3. Material humidity

Material humidity refers to the moisture content of the conveyed material, which has a significant impact on the operating efficiency of the conveyor belt and the quality of the conveyed material. Excessive humidity can cause materials to adhere to the conveyor belt, affecting the conveying effect; If the humidity is too low, it will cause the flowability of the material to deteriorate, which will also affect the conveying effect.

2、 The correct setting of conveyor belt parameters

1. Speed setting

a. The operating speed of the conveyor belt is determined based on the characteristics of the conveyed material and the length of the conveyor belt, and generally should not exceed the flow limit of the material.

b. Adjust the speed of the conveyor belt according to the actual situation to avoid affecting the conveying effect if the speed is too fast or too slow.

2. Setting the tilt angle

a. The inclination angle of the conveyor belt should be determined based on the characteristics of the conveyed material and the length of the conveyor belt, and generally should not exceed the flow limit of the material.

b. Adjust the inclination angle of the conveyor belt according to the actual situation to avoid affecting the conveying effect if the angle is too large or too small.

3. Setting of material humidity

a. Determine the operating parameters of the conveyor belt, such as speed and tilt angle, based on the characteristics and humidity of the conveyed material.

b. Adjust the operating parameters of the conveyor belt according to the actual situation to avoid excessive or insufficient humidity affecting the conveying effect.

3、 Factors affecting the conveying parameters of conveyor belts

1. The impact of speed on conveyor belts

a. Excessive speed can lead to poor fluidity of materials, which can easily cause material accumulation and damage.

b. Slow speed can lead to increased adhesion of materials, which can easily cause material adhesion and blockage.

2. The influence of inclination angle on conveyor belt

a. Excessive tilt angle can cause material to slip and affect the conveying effect.

b. A too small tilt angle can cause materials to adhere to the conveyor belt, which can also affect the conveying effect.

3. The influence of material humidity on conveyor belts

a. Excessive humidity can cause materials to adhere to the conveyor belt, affecting the conveying effect.

b. Low humidity can lead to decreased fluidity of materials and also affect the conveying effect.

Summary:

The setting of conveyor parameters is an important guarantee for the operation effect of the conveyor belt, and it needs to be adjusted reasonably according to the actual situation. Through the introduction of this article, it is believed that readers have gained a deeper understanding of the conveying parameter settings of the conveyor belt, which can better achieve efficient operation of the conveyor belt.